Light Stand Mount
![]() |
![]() Light Stand Mount Electric Roller Background System US $278.95
|
![]() Photography Light Stand Mount Background Support System US $128.95
|
![]() Flash Soft Box DiffuserMountLight StandTrigger PT 04 US $128.00
|
![]() Reflective Flash Umbrella SoftboxMountLight Stand—HOT US $108.00
|
![]() 60cm 2 clothFlash Soft Box DiffuserMountLight Stand US $107.00
|
![]() Light StandFlash MountUmbrella DiffuserCarry Bag—KIT US $107.00
|
![]() 242 clothFlash SoftBox DiffuserMountLight Stand— US $102.50
|
![]() 43Reflective Flash Umbrella DiffuserMountLight Stand US $101.00
|
![]() Lowel KS 9 Lightstand with 5 8 inch Mounting Stud US $100.54
|
![]() 43Reflective Flash Umbrella Soft BoxMountLight Stand US $99.00
|
![]() 2m Light StandFlash MountSoft Box UmbrellaCarry Bag US $99.00
|
![]() 80cm Umbrella Soft Box DiffuserFlash MountLight Stand US $98.99
|
![]() 20×27Umbrella SoftBox DiffuserFlash MountLight Stand US $98.00
|
![]() 43 Speedlite Flash Umbrella Soft BoxMountLight Stand US $98.00
|
![]() Light StandFlash MountWhite Soft UmbrellaCarry Bag US $98.00
|
![]() Studio Light StandFlash MountReflective UmbrellaBag US $96.99
|
![]() Light StandFlash MountSoft UmbrellaBag——Portable Kit US $96.00
|
![]() Light StandFlash MountReflective UmbrellaCarry Bag US $96.00
|
Talley Scope Mounts
Talley mounts are widely regarded as some of the best manufactured. They have created a range of quality scope mounts that fit the needs of all types of rifle owner and user.
Talley tactical rings are CNC machined from a single billet of 7075 T-6 aluminium. This is the same aluminum that the better manufacturers use for M-16 recievers and it is 40% stronger than the 6000 series aluminum often used by other manufacturers. The hole is drilled through both mounts at the same time, ensuring perfect alignment. As long as your rail is straight, your rail will be too. To ensure the clamps go back on the same mount, each component is individually serial numbered. The mounts are immensely strongly engineered and a stainless steel crossbar takes the recoil. This mount is cleared for .50 BMG and will take the recoil of any magnum hunting caliber. The Talley mount fits MIL-STD 1913 Picatinny rails. For corrosion protection, all fixings are stainless and four Allen screws per clamp prevent the scope from moving in the mount. Talley rings in tactical format are made in both 30mm and 1" and come in low, medium and high sizes. As you would expect they feature a hard anodized finish in black to match military weapons.
Talley quick detach rings fit Talley's own bases which are made for a great variety of hunting rifles. These steel mounts have a great following. They are very sleek and not prone to snagging on clothing or gear. A rugged steel bar is used to take the weapon's recoil. This mount will stand up to all magnum hunting calibers. These mounts are very attractive and look great on classic hunting rifles. The Talley rings in QD are available in 1" and 30mm in low, medium and high and all models can be purchased in blued, satin or stainless.
Talley fixed rings were developed from the Talley quick detach ring and offer a really strong mounting solution at the minimum weight for hunting and target shooting purposes. They have a very slim profile as they clamp vertically which prevents the tendency for the scope to rotate in the mounting whilst being torqued down.
Alien Bees AB800 - Setup & Light Stand Install
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.


US $1,460.00
















































































Comments are closed.